美隆電子有限公司

Mayloon Electronic Co., Ltd.,

  • 增加字體大小
  • 預設字體大小
  • 減少字體大小

Fuse Resistor FR10

E-mail 列印 PDF

保險絲電阻

SINLOON® 繞線塗裝絕緣保險絲電阻 FR10 series
Power Rated: 1/2W ~ 1W WIRE WOUND FUSES RESISTOR
Fusing Resistor - FR10
FEATURES
The Fusible resistor is applied to safety circuit in wide range of electronic sets.
Complete flame proof construction resistance range 0.12R ~ 75R ohm
Resistance tolerance : ±5%; ±10%/
There are 4 color band is in white color means wire wound fusible resistor

保險絲與電阻其材質及結構上有類似之特性,而保險絲電阻兼備二者之功能,設置於電路中可當一般電阻使用,一旦電流異常時,發揮其保險絲特性保護產品電路不致全部受損。
由於保險絲特性有二用的功能,故在設計電路時,很多工程師都會使用保險絲電阻放置於電路中,大大降低成本。本公司所生產之貼片保險絲產品,為貼片型表面封裝,適用於平面化及小型化之產品類別,功率分別由1/4W ~ 1W,價格比市面所使用的玻璃封裝和繞線保險絲電阻體積更小,成本更底,具有價格上的優勢。

The fusing time 30/sec Max.
INTRODUCTION
RF10 Type (Standard)
Rated power : 1/4W ; 1/2W; 1W.
Superior quality fusible resistors which are flameproof during operation
These resistors fuse in less than 30 seconds at 16 times rated power
EXTERNAL DIMENSIONS
Type Power DIMENSION (mm)
L ΦD H Φd
RF10-025 1/4W 7.0±0.5 2.5±0.2 25±2 0.56±0.03
RF10-025 1/2W 10±0.5 3.0±0.5 25±2 0.56±0.03 Reference Standard
40±2 IEC 60115-1
RF10-100 1W 10±0.5 3.0±0.5 25±2 0.56±0.03 JISC 520-1
40±2 UL 1412.
FUSING CHARACTERISTICS
Type Power Resistance Tolerance Magnification of Power Rating Fusing TCR Dielectric
Rating Range Time (ppm/) withstanding
RF10-025 1/4W 0.22Ω~100Ω ±5% X15 X20 X25 30S ±250 >600V
RF10-050 1/2W 0.22Ω~100Ω ±5% X15 X20 X25 30S ±250 >600V
RF10-100 1W 0.2Ω~75Ω ±5% X10 X20 X25 30S ±250 >600V
Rated Ambient Temperature: 70.
Operating Temperature Range: -40 ~ +155
Rated Continuous Working Voltage: RCWV= P*R (Rated Continuous Working Voltage = Power * Resistance (Ω)
The above power rating and fusing time for standard fusible resistors,  other spec. on request
Remark: The products value range for standard resistance, below or over this resistance on request please contact us.
Fusing Resistor – RF10 Series
There are some similarities between resistor and fuses in material and structure, Fusing Resistor contain both function,
as being resistor in normal condition and changed into fuse while abnormal current comes in to product machine and
equipment. Since two functions performed by resistor, the cost therefore saved.
Our RF10 Fusing Resistor series are produced with precision technique, enabling precise fusing time and stabilized
aiming to reach best quality resistors.
應用說明:
保險絲電阻與電阻器在材質及構造上本身就有類似之處,而保險絲電阻器具有兩者之特性功能,在正常使用情況下可當作一般電阻,
一旦電流有異常時就可發揮其保險絲的作用來保護電器等產品設備。
高端產品及其它需要UL安全認證之家電產品,採購使用保險絲零部件時,也必需具備有UL認證的保絲電阻廠家才能取得相關的認證。
本司所經銷之RF 保險絲電阻也已具備了這一認證條件。查詢更多資料請向本司業務部接洽。
 
歡迎您瀏覽本網站 WELCOME TO MAYLOON
Mayloon Electronic Company Limited Mayloon Lighting Company Limited

Mayloon on-line chat now

即時業務接洽
WhatsApp:91808452
QQ:1247069489
E-mail: peter@mayloon.com
TEL:852-2408 9788 M: 9180 8452

消息

美隆照明有限公司
承接換燈照明工程:
更新換舊
各類型照明燈具
瑩光燈管換LED燈管
包括:燈管支架/有罩燈盤/格柵燈盤等
歡迎來電查詢
MP.:91808452

Newsflash

串聯LED照明的電路保護最佳化策略
產品應用 串聯LED照明的電路保護最佳化策略
  發光二極體(LED)是一種易碎的裝置,容易受到熱、機械衝擊、靜電放電及閃電的威脅,
特別是在室外應用時。由於使用照明及背光顯示的LED燈串持續增加,需要研發工程師
更加關注於LED串的可靠性。高亮度的LED由於採用藍寶石基板,對鄰近雷擊閃電攻擊
造成的電壓瞬變非常敏感。即使是在家庭應用中,LED串仍需要靜電放電(ESD)保護裝置,
以確保整個元件能長期可靠地執行。在缺少電路保護的情況下,如果串聯中的一個LED
出現故障,並斷開電路,所有其他的LED燈將隨之斷電。
LED照明系統保護 
許多保護裝置可用於電源與LED驅動, AC電路熔絲 可以提供基本的防火保護,以避免
重要系統故障而導致過電流的情況,但它必須能夠耐受3KA6KA以上的突波,而不出
現斷路。在下游元件出現故障的情況下,AC熔絲適用於DC-DC轉換器或LED驅動電路中
的快速過電流保護。
                   

串聯LED照明的電路保護