美隆電子有限公司

Mayloon Electronic Company Limited

  • Increase font size
  • Default font size
  • Decrease font size

Infrared sensor switch 21-4115X

PIR- 紅外線感測器開關系列

Infrared sensor switch series

Data Specification.

T-3004X

Model No.

21-4115X

21-4115B

Working Voltage

AC220V  50Hz

AC220V  50Hz

Controllable Loading

≦ 300W ≦ 3 lamps

≦ 100W ≦ 5 lamps

Standby power consumption

≦ 1W (Standby)

Start Lux Setting

< 10Lux

Induction range

The radius of the induction top is 1-2 meter and the wall is 4-6 meters

Time delayer

40±10s

Detection angle

110°

Mounting height

1.5m (Ceiling installation): <3.5m.(Wall installation)

Operating height

-20 ℃ ~ 45 ℃

IP Rating

IP20

Size (mm)

L:68xW:32xH:25

  • 「本公司保留隨時修改或變更內容之權利,恕不另行通知。」
  • 「The company reserves the right to modify or change the content at any time without prior notice."

 
歡迎您瀏覽本網站 WELCOME TO MAYLOON
Mayloon Electronic Company Limited Mayloon Lighting Company Limited

Mayloon on-line chat now

即時業務接洽
WhatsApp:91808452
QQ:1247069489
E-mail: peter@mayloon.com
TEL:852-2408 9788 M: 9180 8452

Newsflash

二極體簡易檢測方法
產品應用

Chip Switching Diode 二極體簡易檢測方法

二極體檢測方法
普通二極體的檢測
二極體的極性通常在本體上注有標記,如無標記,可用萬用表電阻檔測量其正反向電阻來判斷(一般用R×100或×1K檔)具體方法如(圖)
正向
矽管:錶針指示位置在中間或中間偏右一點;
鍺管:錶針指示在右端靠近滿刻度的地方 (如圖所示)表明管子正向特性是好的。 如果錶針在左端不動,則管子內部已經斷路
反向
矽管:錶針在左端基本不動,極靠近OO位置, 鍺管:錶針從左端起動一點,但不應超過滿刻度的1/4(如圖所示),則表明反向特性是好的,如果錶針指在0位,則管子內部已短路。

 

二極管檢測方法