Metal Oxide Film Resistor - MOR Series
INTRODUCTION | |||||||||
These Metal Oxide Resistors offer excellent performance in applications where stability and uniformity of | |||||||||
characteristics are desired. They provide lower cost alternatives to Carbon Composition Resistors and | |||||||||
General Purpose Metal Films. Metal Oxide also can replace many low power General Purpose Wire wound | |||||||||
applications, saving both money and time, with shorter delivery cycles. | |||||||||
DIMENSION (mm) | SINLOON® | ||||||||
Power: | STYLE | Dimension (mm) | |||||||
L | ΦD | H | Φd | ||||||
1/4W | MOR-25 | 6.0±0.2 | 2.3±0.3 | 28±2 | 0.5±0.02 | ||||
1/2W | MOR-50 | 9.5±0.5 | 3.2±0.5 | 26±2 | 0.6±0.02 | ||||
1W | MOR-100 | 11.0±0.5 | 4.5±0.5 | 35±2 | 0.7±0.02 | ||||
2W | MOR-200 | 15±0.5 | 5.0±0.5 | 32±2 | 0.8±0.02 | ||||
3W | MOR-300 | 17±0.5 | 6.0±0.5 | 32±2 | 0.8±0.02 | ||||
5W | MOR-500 | 25±1 | 8.0±0.5 | 35±3 | 0.8±0.02 | ||||
RATED POWER | |||||||||
Type | Power 70℃ | Maximum Voltage | Dielectric withstanding | Max.intermittence | Res. E96 | T.C.R. | |||
Working | Overload | Voltage (AC) | Overload Voltage | Range(Ω) | ppm/℃ | ||||
MOR-25 | 1/4W | 250V | 400V | 300V | 400V | 1R ~510K | ±350 | ||
MOR-50 | 1/2W | 350V | 700V | 350V | 700V | 1R ~510K | ±350 | ||
MOR-100 | 1W | 350V | 700V | 350V | 1000V | 1R ~510K | ±350 | ||
MOR-200 | 2W | 350V | 700V | 500V | 1000V | 1R ~510K | ±350 | ||
MOR-300 | 3W | 500V | 1000V | 1000V | 1000V | 1R ~510K | ±350 | ||
MOR-500 | 5W | 500V | 1000V | 1000V | 1000V | 1R ~510K | ±350 | ||
Operating temperature Range: | -55℃ ~ 155℃ | ||||||||
FEATURES | |||||||||
High power-to-size ratio for significant space savings. | |||||||||
Excellent long-term stability. | |||||||||
Complete flameproof construction. | |||||||||
High surge/overload capability. | |||||||||
Wide resistance range : 1Ω ~ 180K Ω. | |||||||||
Standard tolerance : ±5% ,± 2% |
金屬氧化膜電阻 Metal Oxide Film Resistor
< 前一個 | 下一個 > |
---|