美隆電子有限公司

Mayloon Electronic Co., Ltd.,

  • 增加字體大小
  • 預設字體大小
  • 減少字體大小

保險絲電阻 (UL)

Resistor 繞線保險絲電阻

PDF File  Data Spec Wire Wound Fusible Resistor - FR Series

Resistor FEATURES SINLOON®
The Fusible resistor is applited to safety circuit in wide range of electronic sets.
Complete flame proof construction resistance range 0.33R ~ 1K ohm
Resistance tolerance  ±2%, ±5%.
There are 5 color band is in wgite color means wire wound fusible resistor
The fusing time 60/sec Max.
Resistor EXTERNAL DIMENSIONS
Type Power DIMENSION (mm)
L ΦD H Φd
FR025 1/4W 6.3±0.5 2.3±0.3 28±2 0.55±0.03
FR50S 1/2WS 6.3±0.5 2.3±0.3 28±2 0.55±0.03
FR50 1/2W 9.0±0.5 3.2±0.5 28±2 0.65±0.03
FR100S 1WS 9.0±0.5 3.2±0.5 28±2 0.65±0.03
FR100 1W 11.5±1.0 4.5±0.5 35±2 0.78±0.03
FR200S 2WS 11.5±1.0 4.5±0.5 35±2 0.78±0.03
FR200 2W 15.5±1.0 5.0±0.5 35±2 0.78±0.03
FR300S 3WS 15.5±1.0 5.0±0.5 35±2 0.78±0.03
Fuse Resistor (溶斷保險絲電阻)
Data Sheet  Fusible Resistor - FR Series
Resistor RATED POWER
Type Power Limiting Element Resistance Resistance Operating
Voltage Range Tolerance temperature Range
FR025 1/4W 200V 1R~1KΩ G=±2% J=±5% -40~ +155
FR50S 1/2WS 250V 1R~1KΩ
FR50 1/2W 250V 1R~1KΩ
FR100S 1WS 300V 1R~1KΩ
FR100 1W 300V 1R~1KΩ
FR200S 2WS 350V 1R~1KΩ
FR200 2W 350V 1R~1KΩ
FR300S 3WS 400V 1R~1KΩ
Remark: The products value range for standard resistance, below or over this resistance on request please contat us.
: 如有低於或高於規格參數阻值的要求請聯絡我們
Resistor INTRODUCTION
FR Type (Standard)
Rated power : 1/4W ~ 2W; 1/2WS ~ 3WS.
Superior quality fusible resistors which are flameproof during operation These resistors fuse
in less than 30 seconds at 16 times rated power

保險絲電阻 Fusible Resistor

最近更新在 週六, 21 十一月 2015 03:13  
歡迎您瀏覽本網站 WELCOME TO MAYLOON
Mayloon Electronic Company Limited Mayloon Lighting Company Limited

Mayloon on-line chat now

即時業務接洽
WhatsApp:91808452
QQ:1247069489
E-mail: peter@mayloon.com
TEL:852-2408 9788 M: 9180 8452

消息

美隆照明有限公司
承接換燈照明工程:
更新換舊
各類型照明燈具
瑩光燈管換LED燈管
包括:燈管支架/有罩燈盤/格柵燈盤等
歡迎來電查詢
MP.:91808452

Newsflash

光源顯色性
光源 [顯色性]:
光源對物體本身顏色呈現的程度稱為[顯色性],也就是顏色逼真的程度,通常
叫做 “顯色指數”。 它的單位 Ra 來表示。
Ra 值的确定.是將 DIN6196 標準中定義的8種顏色在標準光源和被測試下做比較,
色差越小則表示被測光源的顏色的顯色性越好。
Ra 值為100% 的光源表示,事物在其燈下顯示出來的顏色與在標準光源下一致。
物體光源在測試下百分比越高表示顯色性程度越好。