美隆電子有限公司

Mayloon Electronic Co., Ltd.,

  • 增加字體大小
  • 預設字體大小
  • 減少字體大小

LED Flood Light TGD160W

SINLOON® LED 投光燈/泛光燈系列 光束精準反射效果最佳
LED Flood Light Good heat dissipation performance
PDF File LED Flood Light  MLL-TGD160W
Features: Application
Power Range: 10W ~ 200Watt. LED Flood Light widely application for
High utilization of power, PF>0.9 . Dancing halls, Modern buildings,
IP Rating is up to IP65 Advertising boards,  External walls, -
Lifespan  50,000 hours Squares, Streets, Parks, Scenic spot,
Good heat dissipation performance Karts caves, Garden lighting projects and ect.
Metallic aluminum PCB with excellent heat conduction and cooling. - - - - -
Compared with traditional ones, Energy-saving percentage 60%.
Aluminum die-cast alloy body and toughened glass, durable and
completely corrosion resistance.
Characteristic Parameters:
型號 Model No. MLL Series: MLL-TGD160B
尺寸 Dimension (L*W*T): mm 920*285*191
功率 Power: 160W
輸入電壓Input Voltage: AC100-240V 50/60Hz
類型 LED Type: Cree, Epistar , Bridge and Others COB
功率/亮度 System Power (W): 80-100lm/W
光通亮 LED Flux (lm): 12000lm±10%
燈具效率 Lighting Factor: >87%
功率系數 Power Factor: > 0.9 PF
色溫 Color Temperature (K) Warm, White, 2700K-7000K
顯色指數 Color Rendering Index (CRI): Ra >70
發光角度 Illumination Angle: 120o
壽命 Lifespan: 50,000hrs
環境溫度 Ambient Temperature (): 25
應用環境 Temperature Operating: -20 ~ +40
認證 Certificate: CE,SAA,ETL,DLC.
保固 Warranty: 3 Years
* If you have any question which is not is in the specification, please contact us.
*在本規格書裡如果您未能找或參數指標未能達到你的應用要求即未在本規格書裡表現出來請與我們聯絡.
 
歡迎您瀏覽本網站 WELCOME TO MAYLOON
Mayloon Electronic Company Limited Mayloon Lighting Company Limited

Mayloon on-line chat now

即時業務接洽
WhatsApp:91808452
QQ:1247069489
E-mail: peter@mayloon.com
TEL:852-2408 9788 M: 9180 8452

消息

美隆照明有限公司
承接換燈照明工程:
更新換舊
各類型照明燈具
瑩光燈管換LED燈管
包括:燈管支架/有罩燈盤/格柵燈盤等
歡迎來電查詢
MP.:91808452

Newsflash

感測電阻在電路中之應用

Current Sension Chip Resistor  按此還有更多 感測電阻在電路中之應用

在電流路徑中以串聯的方式插入一個低電阻值的感測電阻,將會形成一個較小的壓降,該壓降可被放大而成為一個與電流成正比的輸出訊號。然而,根據實際應用環境與感測電阻的位置,這一技術可能對感測放大器帶來各種挑戰。例如,將感測電阻放在負載與電路接地之間,那麼所形成的壓降可採用簡單的運算放大器(OP)進行放大。這種方法被稱為低側電流感測,與其相對應的方法為高側感測,即感測電阻位於供電電源和負載之間。 

Figure Circuit CS

電流的感測一般採用兩種基本方案。一種是測量電流流過的導體周圍磁場,另一種是在電流路徑中插入一個小型電阻,然後測量電阻上的壓降。第一種方法並不會引起干擾或插入損耗,但成本相對較為昂貴,而且容易產生非線性效應與溫度係數誤差。因此磁場感測技術通常只局限於一些能夠承擔無插入損耗的高成本應用。