Data Sheet Heat Wire Wound Resistor - HWW
EATURE
◆ FLAME-PROOF COATING TYPE
◆ KNP (STANDARD TYPE)
◆ NKN (NON-INDUCTIVE TYPE)
◆ HWW (HEAT WIRE WOUND RESISTOR)
INTRODUCTION
(1) The resistor is fabricated using a suitable fiberglass or ceramic core with the resistance wire securely crimped to the terminals.
(2) Small in size comparatively than other kind resistor.
(3) Electrical and Mechanical stability and high reliability.
(4) Tolerance of 5% , 10% are standard.
ENERAL SPECIFICATION | |||||
Figure | Power | Type | Resistance Range | Package | |
Standard | Maximum | ||||
1/2W | HWW050 | 0.1 ~ 80Ω | 330Ω | Bulk | |
1WS | HWW100S | 0.1 ~ 80Ω | 330Ω | Bulk | |
1W | HWW100 | 0.1 ~ 100Ω | 1.5KΩ | Bulk | |
2WS | HWW200S | 0.1 ~ 100Ω | 1.5KΩ | Bulk | |
2W | HWW200 | 0.1 ~ 100Ω | 2.2KΩ | Bulk | |
3WS | HWW300S | 0.1 ~ 100Ω | 2.2KΩ | Bulk | |
3W | HWW300 | 0.1 ~ 150Ω | 3.3KΩ | Bulk | |
4W | HWW400 | 0.1 ~ 150Ω | 3.3KΩ | Bulk | |
5WS | HWW500S | 0.1 ~ 150Ω | 3.3KΩ | Bulk | |
5W | HWW500 | 0.1 ~ 150Ω | 4.3KΩ | Bulk | |
7W | HWW700 | 1 ~ 470Ω | 3.3KΩ | Bulk | |
10W | HWW10W | 2 ~ 1KΩ | 4.7KΩ | Bulk |
< 前一個 | 下一個 > |
---|