美隆電子有限公司

Mayloon Electronic Co., Ltd.,

  • 增加字體大小
  • 預設字體大小
  • 減少字體大小
Home

Melf Fusible Resistor

E-mail 列印

Resistor Melf Fusible Resistor - FRM  (保險絲晶圓電阻)

PDF File  Data Spec Melf Metal Fusible Resistor - FRM

Resistor FEATURE

FEATURE

Advanced Metal film technology.

Power 1/8W~ 3WS

Force fitted steel caps, tin plated on nickel barrier.

Pure Sn termination on Ni barrier layer.

Compatible with lead (Pb)-free and lead containing soldering processes.

Lead (Pb)-free and RoHS compliant .

There are some similarities between Resistor and Fuses in material and structure. Fusible Resistor

contain both functions, as being Resistor in normal condition and changed into fuse while abnormal

Current comes in to protect machine and equipment. Since two functions performed by one resistor,

the cost therefore saved. FRM Fusible Resistor series are produced with precision technique,

Enabling precise fusing time and stabilized, aiming to reach best Quality Resistor.\

(FRM 保險絲晶圓電阻系列生產採用了精密技術,精確的熔斷時間和穩定的質量,

旨在生產出色的熔斷保險絲晶圓電阻。)

 

 

 

DIMENSION SINLOON®
Power Size Type L Φ D L1 L2
1/8W 0204 W-FRM04 3.5 ±0.20 1.6 ±0.2 2.1 ±0.1 0.70 ±0.1
1/4S 0204 V-FRM04 3.5 ±0.20 1.6 ±0.2 2.1 ±0.1 0.70 ±0.1
1/4W 0207 V-FRM07 5.7 ±0.20 2.4 ±0.15 4.1 ±0.1 0.80 ±0.20
1/2WS 0207 U-FRM07 5.7 ±0.20 2.4 ±0.15 4.1 ±0.1 1.70 ±0.20
1/2W 0309 U-FRM09 8.5 ±0.20 3.3 ±0.15 6.1±0.2 1.70 ±0.20
1WS 0309 S-FRM09 8.5 ±0.20 3.3 ±0.15 6.1±0.2 1.70 ±0.20
1W 0411 S-FRM11 10.5 ±0.30 4.3 ±0.2 6.2±0.3 2.30 ±0.20
2WS 0411 Q-FRM11 10.5 ±0.30 4.3 ±0.2 6.2±0.3 2.30 ±0.20
2W 0515 Q-FRM15 14.5 ±0.30 2.6 ±0.3 9.9±0.4 2.30 ±0.20
3WS 0515 N-FRM15 14.5 ±0.30 2.6 ±0.3 9.9±0.4 2.30 ±0.20
Power Rated
Power Size Type Tolerance Resistance  (Ω) / Multiple
功率 尺寸 型號 誤差 x16 x20 x25 x30 x40
1/8W 0204 W-FRM04 5.1R~2.2K 1R ~ 4.7R 0.47R~0.91R --- ---
1/4S 0204 V-FRM04 5.1R~2.2K 2.4K~10K
1/4W 0207 V-FRM07 5.1R~2.2K 1R ~ 4.7R 100m~200m 100m~180m
1/2WS 0207 U-FRM07 G= ±2% 5.1R~2.2K 2.4K~10K
1/2W 0309 U-FRM09 J = ±5% 2.2R~5K 0.47R~2R 100m-430m --- ---
1WS 0309 S-FRM09 2.2R~5K
1W 0411 S-FRM11 2.2R~2K 0.47R~2R0 100m~180m
2WS 0411 Q-FRM11 2.2R~2K
2W 0515 Q-FRM15 2.2R~1K
3WS 0515 N-FRM15 2.2R~1K

晶圓保險絲電阻

 
歡迎您瀏覽本網站 WELCOME TO MAYLOON
Mayloon Electronic Company Limited Mayloon Lighting Company Limited

Food Waste Machine

廚餘機

Connection


Who's Online

現在有 208 訪客 在線上

Mayloon on-line chat now

即時業務接洽
WhatsApp:91808452
QQ:1247069489
E-mail: peter@mayloon.com
TEL:852-2408 9788 M: 9180 8452

消息

美隆照明有限公司
承接換燈照明工程:
更新換舊
各類型照明燈具
瑩光燈管換LED燈管
包括:燈管支架/有罩燈盤/格柵燈盤等
歡迎來電查詢
MP.:91808452

Newsflash

善用每一分預算

正确量測LED電源

二次節能

 

善用每一分預算

理想的電源是成本不高,效率能達到100%,並且不佔用空間。電力電子工程師習慣了從客戶那裡聽取意見,他們也會盡最大力量去滿足那些要求,力圖在最小的空間和預算範圍內進行系統設計。在進行LED驅動器設計時也不例外,事實上它面對更大的預算壓力,因為傳統的照明技術已經完全實現了商品化,其價格已經非常低廉。所以,花好預算下的每一分錢都非常重要,這也是一些電力電子設計師工程師被老習慣‘引入歧途’的地方。要將LED電流的精確度控制到與數位負載的供電電壓的精度相同,則會既浪費電,又浪費錢。100mA1A是當前大多數產品的電流範圍,特別是目前350mA(或者更確切地說,光電半導體結的電流密度為350mA/mm2)是熱管理和照明效率間常採納的折衷方案。控制LED驅動器的積體電路是矽基的,所以在1.25V的範圍內有一個典型的帶隙。要在1.25V處達到1%的容差,亦即需要±12.5mV的電壓範圍。這並不難實現,能達到這種容差或更好容差範圍的低價電壓參考電路或電源控制IC種類繁多,價格低廉。當控制輸出電壓時,可在極低功率下使用高精度電阻來回饋輸出電壓(如圖所示)。為控制輸出電流,需要對回饋方式做出一些調整。這是目前控制輸出電流的唯一且最簡單的手段。

正確測量LED供電電源

封閉實際光輸出的控制回路

標準電源設計中常見的習慣